At present, people have started to pay more attention to the exterior of their homes as it increases the overall worth of their property, and the main thing that everyone notices at first in the garage is a door. Although these doors are available in numerous kinds of textures and materials, colours, or designs, knowing what type of door you want to install in your house is the main concern. However, if you are looking for an eye-catching and low-maintenance door for your garage, a fibreglass garage door is made for you.
These doors are extremely durable and retain long-term benefits. Likewise, they are easy to handle. But similar to any other door material, they are also inclined to damage. If you notice any issue with these doors, just take the help of a technician for its repair. It is always recommended to avoid DIY in case of a major issue as you might end up making it the worst. On the other hand, with the minimum care and attention, you can easily maintain these doors for a long time.
Reasons Why Fiberglass Garage Doors Get Damaged:
No doubt that the garage door fiberglass is strong yet it can get damaged because of many reasons. It is crucial to take proper care of these doors to protect them from any sort of damage. Do you need clarification about how to take care of your doors easily?
If yes, then keep reading further to get the answer. You just need to consider some important things, including cleaning, inspection, and maintenance, from time to time to identify any critical issues before they become worse. If you fail to take care of your doors, this is where the problem begins.
There are numerous reasons why even the best fibreglass garage doors may become damaged. Let’s discuss some common ones below:
- They can become damaged due to being hit by vehicles or other hard objects. This hit, in turn, causes cracks or a breakage in the garage door’s surface.
- As time passes by, exposure to different elements can cause damage to these doors which needs to be repaired on time. It can result in denting, discolouration, or even breakage.
- One major reason that the majority of individuals mostly ignore is whether their doors are installed properly or not.
In case the door is not fixed correctly, it can become damaged sooner or later. Moreover, even if the hardware is not installed appropriately as it should be, it results in pressure on the door which leads to cracks or dents.
- Consistent use of a garage door can cause it to break down at any time for any reason.
As the doors are the most used furniture in your home, they have increased chances of getting scratches or cracks over time.
- Lastly, if a house owner does not follow proper steps for door maintenance, it can become damaged quickly.
For instance, if it is not cleaned routinely or if lubrication is not applied to moving parts, it will result in wear and tear on the door.
Steps to Follow for Repairing a Fiberglass Garage Door:
Individuals must remember that repairing the garage door fibreglass can be difficult. Likewise, you need some specialized tools as well as materials for repairing them correctly. For this reason, it is highly suggested by experts that if you need more clarification or confidence about repairing the issue, it is best to take the help of a specialist.
Are you curious to know about the steps you need to follow to get the best outcome after finishing the repair process? Then, go through the steps discussed below.
Before beginning, just keep in mind that repairing fibreglass garage doors can be tiring and time-taking, so you must be patient and careful while repairing the door.
Cleaning the Damaged Spot Properly:
It is the first and foremost step to begin repairing your door. To do this, use any cleaner to wipe off dirt, loose fibers, or dust around the damaged spot.
Once you have applied the cleaner, leave the damaged region for some time so that it dries completely before moving further.
Sanding the Damaged Spot:
Once the area has been dried completely, the next step is to sand it properly. For doing this, you need to use coarse-grit sandpaper so that the surface of that area will roughen up.
If you are wondering about the reason for doing this step while repairing, then keep in mind that sanding will assist the repair material to stick in the best way. Once done, wipe off the spot again.
Applying Filler on Damaged Spot:
Once the sanding is done and you have cleaned the area, carefully apply fibreglass filler to that specific spot. When you are applying this filler, follow the instructions provided by the manufacturer appropriately.
To apply this filler best, utilize a plastic spreader or a putty knife over the damaged spot. Once done, wait for some time till this filler gets drained fully.
Sanding the Applied Filler:
When the fibreglass filler that you have applied before gets dried entirely after some time, again utilize a fine-grit sandpaper so that the surface of the damaged spot becomes smooth and clean.
After that, sand the corners delicately and cautiously to mix them with the remaining surface of the door. While doing this step, make sure you sand the surface evenly otherwise, you will not get a smooth surface at the end.
Painting the Damaged Spot:
When you are done with the sanding process and the surface gets smoother similar to the remaining surface of the door, apply the paint on the area so that its colour matches that of the surrounding door surface.
While applying any paint on garage door fibreglass, experts highly recommend following the instructions or guidelines provided by the manufacturer to get the best outcome.
How Much Does Best Fiberglass Garage Doors Cost?
A fibreglass door can vary in cost relying on many factors, like the door size, design, insulation level of the door, as well as the manufacturer. As a result, there are cheap fibreglass garage doors as well as expensive ones.
- · Talking about these doors generally, they are normally more costly as compared to steel doors. However, as compared to wooden ones, they are less costly.
- · Without insulation, a basic door of this material can range from 600 dollars to 1000 dollars on average.
- · On the other hand, if you want to buy the latest upgrades model with insulation, then the price can be approximately 2000 dollars or even more than this. But again, this price can differ significantly depending on the particular product and where you bought it.
- · You might be thinking that their prices are high compared to some other door materials, but it is guaranteed that you will not regret investing in these doors because of their durability, low maintenance needs, as well as energy efficiency.
- · Moreover, these doors can provide an aesthetic look to a house and increment its overall worth, making them the best investment for the long term.
Tips for Getting Cheap Fiberglass Garage Doors:
It might be a tempting and attractive option for many people to buy a cheap door, but they should remember that buying a door of superior quality can be worth buying because of its advantages such as its durability and low maintenance.
However, there are some tips and guidelines for you as mentioned below that will assist you in saving your money while purchasing these doors.
- When you are looking to buy cheap fibreglass garage doors, the most important thing you must do is the comparison of prices from different door manufacturers and retailers.
Always do your proper evaluation before making a final decision. Also, search if any discounts, promotions, and sales are available at any shop.
- Buying a door without additional elements or insulation will generally be less costly than the latest model.
But remember that a cheaper option might retain less durability and may offer a different efficiency or insulation level.
- One additional tip to save your money is to purchase a fibreglass garage door from a local supplier, as it does not cost you any shipping prices. Also, the local shops provide decreased prices as compared to larger suppliers.
You can also search for online shops, or repair companies for already-used fibreglass doors in case you are looking for a cheaper option. Most of the repair companies have used doors which they sell at a more affordable price.
Conclusion:
If you are thinking of installing a garage door in your home, go for the fibreglass ones. The best fibreglass garage doors available in the market today offer numerous benefits ranging from durability to efficiency. After going through the information discussed in detail above, I hope you have gotten enough knowledge regarding the maintenance and repair of these garage doors. Contact hollywooddoorcompany.com to get quality repair services and cheap fibreglass garage doors.
